Healthy Air App
User Guide

1. Set the desired hold temperature by tapping the arrows on the Temperature Control icon.
2. Tap on Hold Until to set the temporary hold. Tap Done to save your settings or Cancel to discard any changes.
3. When active, the hold setting will be communicated in a message beneath the temperature and fan status indicators.

Each day has four events: Wake, Leave, Return, Sleep. Navigate between days at the top of the screen.

1. Set the Time, Fan and Temperature for each event by tapping the attribute you wish to change.
2. After setting the attributes for one day, they can be copied to other days by tapping Copy To. Tap the days you wish to copy the schedule to. A checkmark will appear next to those days. Then tap Save.

3. To finish scheduling, set the attributes for the days that you did not “copy to.” In the above example, you would set the time, temperature and fan for Saturday and Sunday. If Sunday’s schedule is the same as Saturday’s, you can again simply use the “copy to” function after setting attributes for one of the days. Tap "Done" on the set schedule screen to save all settings.

4. Tap the “X” in the upper left-hand corner of the screen to reset changes. All scheduled settings will revert back to original AprilAire recommendations. Reset is located at the bottom right of the screen when using IOS, and the top right when using an Android device.

1. Tap the Chart icon at the top of thermostat, humidifier, dehumidifier control pages
2. The Heating/Cooling Run Time chart can be access from the thermostat where the Humidifier and Dehumidifier run Times can be access from their respective control pages
3. View the previous 24 hours, 7 days, or 30 days easily by switching between viewing options. You can also page through previous days, weeks, and months on demand

Tap the new Sensors icon on the Thermostat Home Page to view a list of all sensors connected to that device

Indoor sensors will always lead with the controlling sensor in a highlighted color.

Wireless sensors will include a battery level icon, and turn orange when there is an operational warning.

Tap in the desire sensor to display Historical Sensor Data details"

1. Tap Humidifier on the home screen to access the humidifier screen.
2. To control your humidifier’s status, tap On/Off.
3. Tap + / - to set the desired level of humidity.

Homeowners can be notified when it’s time to replace their connected humidifier's Water Panel or Steam Canister and the app provides an easy and convenient way to purchase new ones. Just tap the replace media notification and follow the in-app instructions. 

Homeowners can also add a Water Panel or Steam Canister directly in the app without needing a Wi-Fi Thermostat. Simply tap 'Add a product' and select the desired Water Panel or Steam Canister model.

1. Tap the Chart icon at the top of thermostat, humidifier, dehumidifier control pages
2. The Heating/Cooling Run Time chart can be access from the thermostat where the Humidifier and Dehumidifier run Times can be access from their respective control pages
3. View the previous 24 hours, 7 days, or 30 days easily by switching between viewing options. You can also page through previous days, weeks, and months on demand

1. Tap the Chart icon at the top of thermostat, humidifier, dehumidifier control pages
2. The Heating/Cooling Run Time chart can be access from the thermostat where the Humidifier and Dehumidifier run Times can be access from their respective control pages
3. View the previous 24 hours, 7 days, or 30 days easily by switching between viewing options. You can also page through previous days, weeks, and months on demand

1. To set the desired mode for your air purification equipment, tap Mode then select Auto, Constant Clean or Off.
2. To activate a temporary event, tap 3 Hour or 24 Hour.
3. The selected event icon will change to solid. To cancel the temporary event, tap the X.
4. Tap Back to return to the device list.

1. Set the Indoor Temperature and Indoor Humidity Limits.
2. To turn an alert on, tap "Enable".
3. Tap "Save" to save settings.

1. To adjust your Away settings, set "Heating and Cooling" set points and "Fan" mode.
2. Tap "Done" to save your settings.

Vacation mode allows you to set a temporary hold on temperature and humidity at a location that you plan to leave for an extended period of time. For example, using vacation mode in conjunction with temperature and relative humidity alerts can provide added peace of mind. Your vacation property or home is monitored and protected in your absence from indoor climate damage such as frozen pipes, mold, mildew, flooring damage, and more.

1. Tap "Vacation Mode" to bring up the vacation settings.
2. Set return date/time temperature set points and fan mode.
3. Tap "X" to discard your changes and return to the Settings screen.

Type in the MAC ID of the new device, and tap Continue.

To remove a device, tap Remove Device. Press Yes to confirm its removal or No to cancel this action.

From here you can change the location name, ZIP/Postal code or world time zone. The location can also be removed from your user account. Note that you cannot remove a location that has devices assigned to it.

To edit any information, tap on the entry, make the changes and press Save when done. Press Back to discard any changes.

Open the device's Settings page and open "Device Sharing". The user who provisioned the dvice is set as the "Device Manager".

Click on the (+) to add the email address of another user's account. The other user must have already set up their user account for this step to succeed.

Set the level of access being granted to the new user. Press "Save" when finished.